Glow film is made from soft PVC,PET etc. and is flexible and can be cut easily into any required shape, either with a pair of scissors or by die cutting. Our PET photo paper can be used to print any photo through a color printer.
adhesive and non adhesive backing .
Character :
1.After being exposed to visible light, those Photoluminescent film would continue to glow for over10 hours (the brightness reaches or exceeds that of the best photoluminescent pigment)
2.Non-toxic Non-radioactive
Application :
This product is a finished product and can be used to create luminous sign, designs(by indirect printing), labels, or route markers in emergency situations. See the following printed picture, they are glowing in the dark.(PET photo paper)
Types and Specification
|
Type |
Specification(m x m) |
Thickness
(mm) |
Remarks |
|
PVC film |
1mx50m |
0.3 |
¡¡non adhesive |
|
PVC film |
1MX50M |
0.5 |
adhesive |
|
|
|
|
|
PVC film |
42CMX50CM |
0.35 |
¡¡ adhesive |
|
PVC photo paper |
A4 ; A6 |
0.35 |
¡¡ adhesive or non adhesive |
Or according to customer's requirement.
Note:
1) Films of special specifications can be separately produced to tailor to customer¡¯s requirements
Characteristics:
1.Photoluminescent vinyl film made from PVC plastic can resist flame to some extent.
2.Able to resist salty solution and detergent (can be washed with detergent);
3.Functional in heat and coldness at the temperature range of -20 to 50¡æ;
4.Excellent physical and mechanical properties;
5.Has instant adhesiveness and can be glued to the surface of general objects
Application Scope:
After the film is cut into specific shapes, they can be applied in the following conditions:
1.Location Indicators: They can be applied to the surface of following objects: switches for electric appliances, remote control panel, wall switches, plugs, receptacles, locks, hand torches, door handles, handrails, fire extinguishers, fire alarms, lifesaving devices, etc. Signs made of photoluminescent vinyl film can be glued to the place where the said object exists for the purpose of convenient operation.
2.Safety Markings: They can be applied to the following places to give safety indication and warming: emergency exits and passages, subway stations, underground passages, civil air defense projects, Kara OK hall, dance halls, cinemas, supermarket stores, hospitals, railway stations, airports, terminals, etc.
Notes & Notices for Use:
1.It should be applied to evenly spread surface at the temperature of 10~40¡æ.
2.Photoluminescent self-adhesive vinyl can be cut into different shapes and glued to specific place (such as telephone set, switch, etc) for decoration and indication.
3.Photoluminescent self-adhesive vinyl surface can be printed with silk screen pattern or word to have a substrate glow effect.
3.When the film is applied to the surface of any object, it should be cleaned and free of oil stain, dust, and any other impurity.
5.Because the film expands in heat and shrinks in coldness, cautious storage is required for film after specific cutout. Meanwhile, it should be clamped or pressed with weight to prevent distortion and curling.
6.Back paper of the film should be removed before use. The film should be applied to object surface with certain press. Special notice should be given to the corner and film edge during application.
7.To guarantee the luminance, photoluminescent self-adhesive vinyl of same series will have color difference with respect to different lots.
8.For a photoluminescent self-adhesive vinyl exceed 10M in length, there will be a laced junction. 9.The remaining film (roll) after application should be enlaced as tightly as possible.
Package & Storage:
1.Package: in roll or sheet, externally packaged with plastic film
2.Storage: stored in ventilated, dry, and cool warehouse whose ambient temperature is 10-40 ¡æ and relative humidity below 70%.
Luminous Products
